Front Crankshaft Pulley Harmonic Balancer L24 L24E L26 L28 240Z 260Z 280Z 280ZX 810 910 Maxima
Crank pulley for the L6 engines
It will work on the L4 engines if you use the L6 water pump and pulley, and also modify the alternator bracket so that the alternator pulley lines up
This one is specifically for the 1980-1983 280ZX non-Turbo, and the 1982-1983 280ZX Turbo
Unlike the earlier crank pulleys, this one has a 7" diameter back plate that has the timing mark on it
To use this pulley on other years or engines, you will need the 80-83 280ZX timing indicator plate p/n 13502-V0801 which is available here on this website.
ALSO, you will need the 45mm long 80-83 280ZX crank pulley bolt.
These bolts are NLA in the U.S. but we have some in stock 12309-V0800
The power steering belt groove can be unbolted and removed if you do not need it
If you have a 74-79 Z with Factory air conditioning, the original wide a/c belt will not work with this pulley.
You will need to use the later narrower width belt for 80-83 model, and you may need to go shorter on the belt since it will sit deeper in the wider groove of the 75-79 compressor's pulley.
This Genuine Nissan pulley is NLA No Longer Available from Nissan in the U.S.